Manual

Instruction Manual
8
Auto-Connecting the Printer
The print server also supports an Auto-Connect function so that you don’t have to
connect / disconnect manually, after the driver for the printer has been installed (i.e.
after the rst manual connect operation or physical connection to the computer).
4. In the USB Device Server Control Center Software, click the Auto-Connect button.
5. In the window that opens, select your printer and click Apply.
6. When you send a print job, the software will automatically connect the printer and
send the print job to it, as long as the control center software is running.
For complete operating instructions, please visit www.startech.com/PM1115UA