Wireless-N 150Mbps USB 2.0 AirPrint™ Server PM1115UA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator and your body. Déclaration d’exposition à la radiation Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 0.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Packaging Contents • 1 x Wireless-N USB 2.0 AirPrint™ Server • 1 x Universal Power Adapter (NA/UK/EU) • 1 x Driver CD • 1 x Instruction Manual System Requirements • Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows Server® 2012, 2008 R2, 2003(32/64), Mac OS® 10.8 and up (Tested up to 10.9) Installation Hardware Installation 1. Power off the printer that will be used with the print server and leave the print server power adapter disconnected. 2.
4. Follow the on-screen instructions to complete the installation. 5. Start the USB Device Server Control Center to search for available print servers on the network. 6. Select your print server from the list and click Configure Server. 7. Login with your username / password (Default: admin / admin). 8. Configure your desired IP address (Static / DHCP), user account name / password and security settings.
10. Once the wireless connection has been established, the LAN cable can be disconnected from the print server.
Mac OS 1. Connect a Cat 5 (or better) Ethernet cable to the LAN port on the print server, then to your router / network. Note: Initial configuration must be done from a wired connection. Once the device has been connected to an existing access point and set with proper IP settings for your wireless network, the LAN cable can be disconnected. 2. From your computer that is connected to the same router/network, insert the provided CD into your DVD/CD-ROM drive. 3.
10. If you want to connect the print server to the network wirelessly, click the Connect to Another AP button to view a list of available networks and choose the access point you would like the server to connect to. 11. Once the wireless connection has been established, the LAN cable can be disconnected from the print server.
Operation Printing Using AirPrint™ AirPrint is an Apple technology that lets you print wirelessly from your iOS device, without the need to download or install drivers. Supported devices: • iPad (all models) • iPhone (3GS or later) • iPod touch (3rd generation or later) 1. Ensure that your iOS device is connected to the same wireless access point that the print server is using. 2. Tap the or icons, which are at the bottom of your screen. 3. Tap the printer icon ( ). 4.
Note: Only one PC at a time can Connect the printer using this method 3. Once you are done using the printer, click the Disconnect button. Auto-Connecting the Printer The print server also supports an Auto-Connect function so that you don’t have to connect / disconnect manually, after the driver for the printer has been installed (i.e. after the first manual connect operation or physical connection to the computer). 1.
Auto-Connecting the Printer The print server also supports an Auto-Connect function so that you don’t have to connect / disconnect manually, after the driver for the printer has been installed (i.e. after the first manual connect operation or physical connection to the computer). 4. In the USB Device Server Control Center Software, click the Auto-Connect button. 5. In the window that opens, select your printer and click Apply. 6.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
