Instruction manual

Instruction Manual
14
Mac OS
To use the print server in Mac OS (10.2 and up), no software installation is required. The
necessary conguration can be done through the Web Console.
1. Open your browser and enter the IP address of the print server in the address bar of
your web browser (Default: 192.168.0.10), then press Enter.
2. Enter your user ID and password (Default: admin / no password).
3. Click the Setup section, then the TCP / IP tab.
4. Change the Rendezvous Settings box to Enabled and enter a Service Name to
identify the print server on the network.
5. Click Save & Restart to apply the settings.
6. On your Mac system, open your System Preferences page, then the Print & Scan
Utility.