PEXUSB3S2 Instruction Manual PCI Express USB 3.0 Controller Adapter Card 2-Port PCI Express SuperSpeed USB 3.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Installation........................................................................ 1 Hardware Installation....................................................................2 Driver Installation...................................
Introduction 10x faster than that of USB 2.0, this SuperSpeed USB 3.0 adapter card enables you to access your data and transfer files much faster than USB 2.0! The new USB 3.0 standard supports transfer rates of up to 5Gbps, while still providing connectivity and support for the older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices. In addition to providing a much faster transfer rate the PEXUSB3S2 USB 3.
LP4 molex connector USB 3.0 type A ports Hardware Installation 1. Turn your computer off and any peripherals connected to the computer (ie. printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer. 2. Remove the cover from the computer case. See documentation for your computer system for details. 3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the computer case.
Driver Installation Windows XP/Server 2003/Vista/7 Once the computer has started and the operating system is fully loaded, insert the provided Driver CD into the computer’s CD/DVD drive. Autorun should start the installation program, so follow the instructions onscreen to complete the driver installation. If Autorun does not start, Go into “My Computer” and access the CD/ DVD drive that the CD is in, and run the “setup.exe” file located on the CD.
Specifications PCI Express 2.0 (x1 connector) Bus Interface USB 3.0 rev1.0 External Connectors 2 x USB 3.0 type A Internal Connectors 1 x LP4 molex power Chipset ID NEC uPD720200 Intel xHCI rev0.95 Maximum Data Transfer Rate USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
