Owners manual
Instruction Manual
5
Verifying Installation
Windows
From the main desktop, right-click on “My Computer” (“Computer” in Vista/7/8), then
select Manage. In the new Computer Management window, select Device Manager
from the left window panel.
Under the “SCSI and RAID Controllers” category (“Storage Controllers” in Vista or later),
should be a “Marvell 92xx” device. Right-click on the device and select “Properties” to
make sure it is installed and working correctly.
For Windows 7 and 8, if using the native drivers, the card will instead be listed under
the “IDE ATA/ATAPI Controller” category as a “Standard AHCI” device.
How to Use
RAID Conguration
To setup a RAID array using the drives connected to the SATA controller card, the
BIOS level conguration menu must be accessed. To access the conguration menu,
during POST (computer startup), the status display for the controller card will display.
When prompted, pressing [CTRL] + [m] will enter the conguration menu. From the
conguration menu, the detected drives can be congured into any of the supported
RAID modes by following the on screen prompts.