Owners manual

4
Insert the power cable into the socket on the power supply and 6.
reconnect all other connectors removed in Step 1.
Driver Installation
Windows XP/Server 2003/Vista/Server 2008 R2
After installing the card into the computer system, boot up the 1.
computer.
Once logged into Windows, the Hardware/Driver installation wizard 2.
should appear. Insert the Driver Installation CD into the CD/DVD
drive when prompted.
Windows should automatically start to search the CD for the 3.
appropriate drivers. This may take several minutes.
Once Windows has located the drivers and installed them, the card 4.
should be ready for use.
Windows 7
No driver installation is required for Windows 7, as the controller card is
natively supported, so the drivers are already installed.