Instruction manual
Instruction Manual
7
Verifying Installation
Windows
1. From the main desktop or start menu, open the Device Manager by right-clicking
on Computer, and then selecting Manage. In the Computer Management window,
select Device Manager from the left window panel. (For Windows 8.1, right-click on
the Start button and click Device Manager).
2. Expand the Storage controllers section, on a successful install you should see the
following device in the list with no exclamation points or question marks. You may
right-click on the device and select Properties to further ensure it is installed and
working correctly.
Note: Depending on your Operating System version, after a successful installation
some users may notice a yellow icon next to Marvell Console ATA Device under the
Other Devices category within the Device Manager. Device performance and operation
is not aected by this notication. If you wish to remove this icon, ensure you have run
the main driver Setup/Install “.exe” application within the Driver folder.