Specifications

Instruction Manual
2
Hardware Guide
There are two SATA ports available on PEXESATA1 - referred to in the above picture as A and B.
Port A is an external SATA (eSATA) port and B is an internal SATA port; Please note that only one
of them will work at a time. Using the jumper settings provided above, please designate which
port is to be used. By default, Port 2 (internal) is set to active.
Connector A
Enabled
Connector B
Enabled
Jumper Settings
JP Action Setting
J1-J4 Enable SATA
Connector A
Set J1-J4 jumpers to pins 1 and 2
Enable SATA
Connector B
Set J1-J4 jumpers to pins 2 and 3
A
B
Jumpers