4 Port Dual Profile PCI-Express UART Serial Card PEX4S552
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Features.......................................................................................1 Package Contents........................................................................1 Installation....................................................................................... 2 Software (Drivers)....................................................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com PEX4S552 4 Port Dual Profile PCI-Express UART Serial Card. Turning a PCI Express slot into four available RS-232 (DB9) serial connections, this innovative card utilizes a native, single-chip design for optimal performance and reliability. Compatible with a broad range of operating systems, including Windows® 2000/XP/2003/Vista™ (32-bit and 64-bit), Linux Kernel 2.6.11 and up, and MAC OS 10.
Instruction Manual Installation Please note: Prior to hardware installation, please ensure that the necessary software has been installed on the host computer as detailed below. Software (Drivers) Windows® 2000/XP/Server 2003 1. From the Windows® desktop click Start, then Run. 2. In the command line that appears, type: x:\PCIe\MCS9901\XP\PCIeSetup32.exe, (where x represents the location of the CD/DVD-ROM drive). 3. Click on OK. 4. Click on Install to begin installing the drivers. 5.
Instruction Manual the PC. 6. Install the PCIe card in an available PCI Express slot on the host computer. For further reference, please see the section titled “Hardware Installation”. 7. Once the PEX4S552 card has been installed within the system, power up the computer. Once the operating system boots, Windows® will automatically start installing the device driver software. Windows Vista™ 1. From the Windows® desktop click Start, then Run. 2.
Instruction Manual 6. Install the PCIe card in an available PCI Express slot on the host computer. For further reference, please see the section titled Hardware Installation. Hardware Installation 1. Turn off the power to the computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCIe slot. 4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5.
Instruction Manual Specifications Specification PEX4S552 Bus Type PCI Express Chipset MOSCHIP MCS9901 Selectable Output from Pin 9 of Serial Port Power Output Windows 2000/XP/2003/Vista™ (x32 and x64) Operating Systems Supported Linux Kernel 2.6.11 & above MAC 10.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.