Instruction manual

Instruction Manual
7
SCO OpenServer
1. Log in as a super-user (SU) or root.
2. Extract all the les on the diskette using the tar command:
# cd /
# tar xvf /dev/fd0135ds18
3. Change the directory to /etc/pciport and run the Build command:
# cd /etc/pciport
# ./build
4. Reboot your system.
The device name will be /dev/tty8[1--2] [a--h]
Card Denitions
Card Number Device
1 tty81?
2 tty82?
Note: Card 1 is the card with the jumper ON.