PCI1P2 Instruction Manual PCI Parallel Adapter Card 1-Port PCI to Parallel Adapter Card Manual Revision:12/03/2010 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents..................................................................... 1 System Requirements.................................................................. 1 Installation........................................................................ 2 Hardware Installation.................................................................... 2 Driver Installation................................
Introduction The PCI1P2 1-Port Parallel PCI Card adds one ECP/EPP/SPP/BPP IEEE 1284 port to your PC, with support for data transfer speeds of up to 1.8Mbps. This versatile card offers compatibility with PCI or PCI-X expansion slots (3.3/5V, 32/64-bit), as well as a simple plug and play installation with support and drivers for a broad range of operating systems including Windows® 7, Server 2008 R2, XP Embedded, DOS®, Linux® and more.
Installation WARNING! PCI cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
then click the Next button. 3. Windows should now start searching for the drivers. Once this has completed, click the Finish button. Windows Vista/7/Server 2008 R2 1. When the Found New Hardware window appears on the screen, click on the “Locate and install drivers software (recommended)” option. If prompted to search online, select the “Don’t search online” option. 2.
Specifications PCI revision 3.0 (33Hz, 3.3V/5V) Host Interface Form Factor Full Profile Chipset ID Sunix SUN1989 External Connectors 1 x DB25 female Supported Standards IEEE 1284-1994 Supported Protocols ECP, EPP, SPP, BPP Maximum Data Transfer Rate 1.8 Mbps FIFO Buffer 16 Byte Operating Temperature 0°C ~ 60°C (32°F ~ 140°F) Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F) Humidity 5% ~ 95% RH Dimensions 121.0mm x 61.0mm x 13.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
