Specifications
Instruction Manual
3
Windows NT 4.0 - Upon booting up for the rst time following the physical installation of the
PCI Parallel card, Windows will detect that the card is present and prompt for driver installation.
Insert the driver CD in your CD/DVD-ROM drive, and direct Windows to search for the correct
driver in the following path: D:\IO\PCI IP\WHQL Driver for 2K_XP_2003, where D:/ species the
CD/DVD-ROM drive letter designation.
Linux - Detailed instructions for Linux installations are located on the accompanying Driver CD,
in the following locations:
D:\IO\PCI IO\Linux\Red Hat V8.0.pdf
D:\IO\PCI IO\Linux\Red Hat V6.0.pdf
DOS - To install the necessary drivers from within DOS, please locate and execute the
following le:
D:\IO\PCI IO\DOS\install.exe
Verifying PCI Parallel Card installation
Once the software installation has completed, verify that the hardware has successfully been
installed on your system:
1. Open Control Panel.
2. Open System.
3. Open Hardware.
4. Open Device Manager.
5. Click on Ports, to display the newly installed port, as shown below. If the port does not
appear, you may be required to re-install the driver software.
Newly installed ports