Instruction manual

Instruction Manual
4
Driver Installation
No driver installation is required for operating systems that support the PCI
Express standard, as the PEX2PCIE4L is natively supported, so the drivers are
already installed.
ExpressBoost
In some cases, if the write performance of your PCI Card is very slow; please
install the ExpressBooster software supplied with the PEX2PCI4L.
1. To install the software, nd the setup.exe le in the following folder on the
driver CD: (assume your CD is in the drive E:), double click the le to run the
setup.
2. Follow the setup on-screen instructions, you will be asked to check the “PCI
Express Card” item (leave the “Express Card” item un-checked). Then proceed
with the rest on-screen instructions to complete the installation.