Instruction manual

Instruction Manual
2
6. Install one end of the Expansion Cable to PCIe add-in card’s connector and the other
end to the Expansion Box’s.
Warning!! The Expansion Cable’s connector has the same form factor as a standard DVI
connector, however, their signals are dierent. Please do NOT connect the Expansion
Cable to either your LCD monitor nor your Video Graphic cards.
7. Next, install the PCI and PCIe add-in cards into the Expansion Box:
a. Open the top cover (by removing the screws) of the Expansion Box. There are 2
PCI and 2 PCIe slots in the Expansion Box.
b. Find an unused slot, remove the “blank” PCI/PCIe card bracket that was pre-
installed from the factory.
c. Plug in your PCI or PCIe add-in card (s).
d. Put the top cover back on your Expansion Box.
8. Connect the AC power Adapter’s cable to the Expansion Box.
9. Turn on the Expansion Box power by means of the power switch next to the
Expansion Cable, then power on the PC system.
10. Proceed with Software Driver Installation if required.
PCI Express
PCI