Manual
Instruction Manual
7
Video Menu
There are a number of options available under the Video menu, including: Auto ne-
tune picture, Video Settings, Video capture and Save PNG snapshot.
Auto ne-tune picture
Use to automatically adjust the sampling phase of the video. This makes the picture
sharper and reduces USB trac. This is generally not required since this operation is
automatically performed when video is applied. The picture will freeze for about one
second while the calibration is performed.
Video Settings
Picture Positioning - These four arrows may be used to ne-tune the position of the
video image, similar to the centering controls found on video monitors. The adjusted
values will be used automatically whenever this same video mode is seen again. The
Auto button will attempt to automatically center the video image within the program
window. Click Save to keep your changes.