Instruction manual

Instruction Manual
8
Menu Item Description
Report device ID when
connected
If this function is enabled, the device will
report the device ID after the socket is
connected. The format is:
Serial I/O socket nnnnnA[LF][CR]
Digital I/O socket nnnnnB[LF][CR]
There are eight bytes: nnnnn is the 5-digit
device ID, [LF] is decimal 10, and [CR] is
decimal 13
Setup password The login password can be empty or 1 to 15
characters long. If the password is empty then
no password is required for login.
Software Installation
VSP Virtual COM Port Driver
The VSP is a redirector driver that allows your applications to use serial devices
provided by serial device servers on your network. This redirection is achieved by
creating one or more virtual COM port(s) that allow these networked serial devices to
function as though they are directly connected to the local computer.
Since the redirector’s virtual COM port(s) function much like standard Windows COM
ports, your application software sees no dierence between a local serial device and
one provided by a serial server.
Installing the VSP Virtual COM Port Driver
1. Locate the necessary Software in the following folder on your driver CD. The
VserPortConsole.exe is the redirector software. The Em.exe is used to setup the
hardware mode to support VSP redirector.