Quick Start Guide

Instruction Manual
6
This front USB 3.0 port can fast-charge a connected device even when the dock isn’t
connected to a host laptop. When the docking station is connected to a host laptop,
the front USB 3.0 port functions as a Charging Downstream Port (CDP), which has
simultaneous charge and sync capabilities.
The provided power adapter must be connected to the docking station in order charge
your mobile device without a connection to a host laptop.
Charge a device
If you’re only using the front USB 3.0 port to charge a device, a connection to a host
laptop isn’t required.
• To charge a device, connect it to the USB 3.0 port located on the front of the
docking station.
Note: This front USB 3.0 port can only fast-charge connected devices that comply with
USB Battery Charging Specication Revision 1.2.
Congure a display device
Use your Windows or Mac operating system to adjust display settings for multiple
monitors. Your laptop hardware must support dual external displays.
• You can set up dual displays by using the video output ports (1x DisplayPort and 1x
HDMI).
Supported video resolutions
The docking station supports 4K Ultra HD resolution if the connected HDMI or
DisplayPort display supports it.
• In a multi-display conguration, set the refresh rates on each of your connected
monitors to the same values, otherwise your monitors might not properly display.
• Video output capabilities are dependent on the video card and hardware
specications of your connected host laptop.
Number of Displays
Supported
Video Output
Conguration
Maximum
Resolution
2 DisplayPort and HDMI
1920 x 1200p
(60Hz)
1 HDMI
4096 x 2160p
(24Hz)
1 DisplayPort
3840 x 2160p
(30Hz)