Instruction manual

5
4. Please wait while the installation package copies the necessary files.
5. Once completed, in the main (root) directory of the CD, run the
XP_VS_Setup.exe file top being the driver installation.
6. When the end of the installation is reached, click “Finish” to restart
the computer system.
7. After Windows has fully loaded, the Video Adapter will be ready to
use.
Hardware Installation for USB
1. Set the EDID slide switch to the ON position.
2. Plug the power adapter into the HDMI Video Adapter. The Power
LED will light up steady.
3. Slide the “Input” selection switch to USB.
4. Plug in the USB Video Adapter to the computer. Windows should
start to automatically load the drivers. Once complete, you should
see this icon in your System Tray: