Computer Drive User Manual

3
driver software anyway” option to proceed.
Once the driver is installed, click the Close button.4.
Verifying Installation
Windows 2000/Server 2003/XP/Vista/7
From the main desktop, right-click on “My Computer” (“Computer” in
Vista), then select Manage. In the new Computer Management window,
select Device Manager from the left window panel.
Double-click on the “Ports (COM & LPT)” option. An additional USB
serial COM port should be visible. The port is ready to connect to new
devices.
DIP Switch Settings
Switch Switch Name
Switch
Position
Description
1 485/422
485
(default)
2-wire RS-485 mode
422 4-wire RS-422 mode
2 Echo/No Echo
Echo
Transmitting data will be
echoed back.
No Echo
(default)
No data echo
3 No Term/Term
No Term
(default)
Terminator resistor is
disabled
Term
Terminator resistor is
enabled
4 None On/Off Switch is not enabled