Owner's manual

Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com Multi-Drive Trayless SATA Hot Swap
Enclosure. This product allows you to install multiple hard drives in seconds, without
having to fasten the drive to the enclosure or the host computer.
Packaging Contents
• 5.25” Trayless SATA Hot Swap Drive Bay (1)
• Instruction Manual
• Mounting screws
• TX4 + SATA Power LP4 Y-cable (x3 - HSB320SATBK x4 - HSB430SATBK)
• SATA data cable (x 3 – HSB320SATBK, x 4 – HSB430SATBK)
System Requirements
HSB320SATBK:
• Two successive, available 5.25” drive bays
• Three available LP4 (4-pin) power connectors
• Three available SATA ports
HSB430SATBK:
• Three successive, available 5.25” drive bays
• Four available LP4 (4-pin) power connectors
• Four available SATA ports