5.25in Dual 2.5/3.5in HDD/SSD SAS SATA Trayless Mobile Rack HSB2535SATBK *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 Introduction......................................................
Product Diagram Front View 1 3 5 2 4 1. 2.5” Drive bay 2. 2.5” Drive bay key hole 3. 3.5” Drive bay 4. 3.5” Drive bay key hole 5. 2.5/3.5in LED indicators Rear View 1 2 3 1. 2.5” Drive SATA port 2. 3.5” Drive SATA/SAS Port 3.
Introduction Packaging Contents • 1 x 2.5/3.5in SATA HDD Backplane • 2 x 18” SATA Cable • 1 x Molex LP4 to SATA Power Adapter Cable • 2 x Bay Key • 1 x Installation Screw kit • 1 x Instruction Manual System Requirements • 1 x Computer System with SATA connectivity and an available 5.25” bay • 1 x Available SATA or LP4 Power Connection • 1 x 2.5” SATA Hard Drive and/or 1 x 3.5” SATA/SAS Hard Drive WARNING! Hard drives and storage docks require careful handling, especially when being transported.
Hardware Installation 1. Ensure your computer system is powered down, and the power cable has been disconnected from the Power Supply. 2. Open your computer case (refer to the computer user manual for details), and place the 2.5/3.5in SATA HDD Backplane into an available 5.25” slot, lining up the side installation holes on the HSB2535SATBK (pictured below), with installation holes on the 5.25” slot inside the computer. 3.
2.5/3.5in Hard Drive Installation 1. Insert either of the included bay keys into the “2.5in/3.5in Drive bay key holes depending on which type of drive you intend to install. And Turn the key clockwise into the unlock position. 2. Pull the drive door handle to open the drive bay. 3. Insert your desired drive. 4. Close the drive door.
2.5/3.5in Hard Drive Removal 1. Insert either of the included bay keys into the “2.5in/3.5in Drive bay key holes depending on which type of drive you intend to install. And Turn the key clockwise into the unlock position. 2. Pull the drive door handle to open the drive bay. 3. Remove your drive. 4. Close the drive door. Note: It is important to eject or unmount the hard drive from your computer system before physically removing the drive.
How to Use Connecting the Hard Drive Once the drive has been installed in the drive bay, the drivers will install automatically, and the inserted drive will be accessible as though it were installed within the system. Prior to using the drive, it will need to be formatted according to your operating system requirements. Refer to Initializing the Hard Drive LED Indicator The HSB2535SATBK offers 2.5/3.5in LED indicators, to enable you to monitor drive activity.
2. A dialog window should automatically appear, asking you to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk. GPT (GUID partition) is required for drives larger than 2TB but is not compatible with some older operating systems, while MBR is supported by newer and older operating systems. 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
