3.5in Trayless Hot Swap SATA Mobile Rack for Dual 2.5in Hard Drives HSB225SATBK *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Front View............................................................................
Introduction The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II, SATA III-6Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused 3.5in floppy drive bay.
Front View Power/Activity LED Door Lock Rear View 15-pin SATA power Instruction Manual 7-pin SATA connector 2
Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. 1.
How to Use Hot Swap If the host SATA controller supports Hot-Swapping, then SATA drives can be removed or installed into the Mobile Rack without having to first shut the computer off. Refer to the documentation for the SATA controller for specific details on how to safely use its hot-swapping feature. If not supported, the computer must be shut down first, to install or remove SATA drives.
Locate the Disk that says it is “Unallocated” (check hard drive capacity to confirm it’s the correct hard drive) and then right-click in the section that says “Unallocated” and select “New Partition”. The New Partition Wizard will appear. Follow the instructions in the wizard to complete setting up the drive. Once complete, the Disk should show up as “Healthy” with a drive letter assigned (i.e. E:). This drive letter should now appear within My Computer.
Specifications Host Interface SATA Number of Drive Bays 2 External Connectors 2x 7-pin SATA Plug 1x 15-pin SATA Power Plug LEDs 2x Drive Power/Activity Compatible Hard Drive Type 2.5” SATA hard drives/solid state drives, up to 9.5mm height Insertion Rating 15000 cycles Key Lock Yes Enclosure Material Steel and Plastic Operating Temperature 5°C ~ 70°C (41°F ~ 158°F) Storage Temperature -40°C ~ 80°C (-40°F ~ 176°F) Humidity 8%~90% RH Dimensions 154.0mm x 101.0mm x 25.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
