Datasheet

3
Contents
This package should contain:
•1 x 7-in-1 card reader
•1 x USB 2.0 cable
•1 x driver disk
Installation
This section will guide you through the installation of your card reader and the related
software. Please read through the instructions carefully and complete each step in the
order listed.
Depending on your OS and the configuration of your system, the instructions below may
not be identical to what you see on your screen.
Installing the Panel
1. Using the USB cable, connect the card reader to your computer’s USB port.
2. Your computer will display a message saying new hardware has been found.
Windows 98SE and 2000 users Follow the onscreen prompts and direct Windows to
the appropriate folder on the driver disk. Windows will install the necessary drivers.
Follow any on-screen prompts to complete the installation.
Using Your Card Reader
The LEDs on the card reader are your best indication of the reader’s activity.
• The solid red Power LED indicates that the card reader is powered.
• The green flashing Access LEDs indicate that there is data being transferred to or
from the connected card.
Inserting a Card
1. Turn on your computer.
2. Insert your memory card into the proper slot on the card reader.
3. Mac users: Anew icon will appear on your desktop.
Windows users: Anew icon will appear in “My Computer.”
4. The card can now be accessed as an extra disk.