Owners manual

Technical Specifications
Warranty 2 Years
Industry Standards IEEE 802.3ae 10GBASE-R (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-
SW, 10GBASE-LW, 10GBASE-EW)
Industry Standards IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T), IEEE 802.3an (10GBASE-
T)
PoE No
WDM No
Auto MDIX Yes
Compatible Networks 10 Gbps
Fiber Operating Mode Full-Duplex
Fiber Type Multi Mode
Fiber Type Single Mode
Flow Control None
Jumbo Frame Support 9.6K max.
Maximum Data
Transfer Rate
20 Gbps (Full-Duplex)
MTBF 57,000 Hours
Remote Management
Ability
Yes
Switching Architecture None
Local Unit Connectors 1 - SFP+ Slot Female
Local Unit Connectors 1 - RJ-45 Female
Local Unit Connectors 1 - DB 9-pin Serial Female
Note Fiber protocols, data transfer speeds and distances are dependent on the SFP+
transceiver used (sold separately).
System and Cable
Requirements
MSA-compliant 10 Gigabit SFP+ transceiver module (Mini-GBIC).
System and Cable
Requirements
The media converter can only be used with 10 Gigabit SFP+ modules and will not
support 10/100/1000Mbps modules.
LED Indicators 1 - Power
LED Indicators 1 - Fiber Link
LED Indicators 1 - Loop
LED Indicators 1 - Alarm
LED Indicators 1 - UTP (RJ45) Link
LED Indicators 1 - Link fault pass-through (LFP)
www.startech.com
1 800 265 1844