Datasheet

Instruction Manual
4
Pressing Menu will save your selection and return you to the main menu.
Picture Adjust
This sub-menu allows you to adjust the contrast, brightness and color of the displayed
image. Using the + and - buttons, select the attribute you wish to change, and use the
Menu button to confirm your selection. Use the + or - buttons to increase or decrease
the amount of the element you are modifying, followed by the Menu button to save.
Repeat this procedure for each element as desired. Once you have made the necessary
adjustments, use the + or - button to navigate to the Exit, which will take you back to the
main menu. NOTE: using the Reset feature will return all adjustments back to the factory
reset values.
HV Adjust
When chosen, a sub-menu will appear, allowing you to adjust the best horizontal and
vertical position of the picture, using the + or - buttons.
OSD Adjust
Allows you to adjust the horizontal and vertical position of the on-screen menu.
System Information
Displays the input and output resolutions and their vertical refresh rate on the screen.
Auto Adjust
When chosen, the scaler will automatically adjust all parameters to the factory preset
values.
Exit
When selected, exits the on-screen display
VGA
VESA85
VGA70
SVGA
XGA
Mac
WXGA
1280A
SXGA
640x480
640x400
720x400
800x600
1024x768
1152x864
1280x768
1280x960
1280x1024
60/72/75/85 Hz
85 Hz
70 Hz
60/72/75/85 Hz
60/70/75/85 Hz
70/75 Hz
60 Hz
60 Hz
60/75 Hz
1080i -RGB
720p -RGB
576p -RGB
480p -RGB
1920x1080
1280x720
720x576
720x480
60 Hz
60 Hz
50 Hz
60 Hz
PC (RGBHV) HDTV (RGBHV)
Output modes available for DVI-D (Digital)