Datasheet

Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using Your Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1
6. Depending on your system, use the appropriate video cable to connect either the S-In
(S-Video) port or the C-In (Composite video) port on the front of the adapter to your
video source.
7. Connect the audio cables from your video source to the Audio In ports on the front
of the adapter.
8. Plug the DC 9V power adapter from an available power source to the DC 9V port on
the back of your adapter.
9. Make sure that the Mode button on the front of the adapter is set to IN for video
mode.
10. Make sure that the S/C button on top of the adapter is set appropriately: IN for S-
Video systems, OUT for Composite video systems.
11. Turn on your video source, adapter, speakers, monitor, and PC. Your monitor should
show a full-screen display of your video source’s startup screen.
Using Your Adapter
• You can adjust the brightness of your screen by pressing the Brightness button on the
top of the adapter to scroll through the brightness options.
• You can adjust the screen position by pressing the Status button on the top of the
adapter to scroll through the adjustment options.
• Pressing the Mode button on the front of the adapter allows you to flip between your
video source and your PC. When the Mode button is pushed in, your monitor will
display information from your video source. When the button is out, your monitor
will display information from your PC.
Troubleshooting
If you are experiencing difficulty with your adapter, first make sure that all cables are
connected to their proper ports and are firmly seated.
There is no video displaying on the monitor.
• Check that the adapter is in Video mode.
• Check that the S/C switch is properly set.
The adapter’s LED is not lit while in PC mode.
• The adapter is in power-saving mode. There is nothing wrong with the adapter.
There is no sound from the video source.
• Check that the adapter is in Video mode.
• Check that the speakers are turned on and at an appropriate volume level.
4