Instruction manual

Instruction Manual
12
Press right <CTRL> and release <F3> <Props>
Press right <CTRL> and release <F4> <Undo>
Press right <CTRL> and release <F5> <Front>
Press right <CTRL> and release <F6> <Copy>
Press right <CTRL> and release <F7> <Open>
Press right <CTRL> and release <F8> <Paste>
Press right <CTRL> and release <F9> <Find>
Press right <CTRL> and release <F10> <Cut>
<Print Screen> <F13>
<Scroll Lock> <F14>
<Pause Break> <F15>
Press right <CTRL> and release <H> <Help>
right < >
right < >
right < >
left < >
left < >
left < >
< >
<Compose>
right <ALT> <Alt Graph> right <OPTION>
left <ALT> <ALT> left <OPTION>
Change Conguration while Running
A device (a computer or a KVM switch) at any ‘PC x’ port can be changed at any time
after initial power-up. If you change any one of the PC 1 to PC 8 ports connection
from a computer to a Slave or vice versa, or replace the devices of a port, the OSD
will update this change the next time it is activated.
NOTE: Any new device must be turned o before it is connected to the Master.