Instruction manual

Introduction

Thank you for purchasing a StarTech.com remote power control switch. This product is

the perfect complement to our IP-based Server Remote Control product line or can be

used as a standalone power management solution. Using a serial interface, you can

remotely manage the power status of up to eight devices. For additional flexibility, you

can use industry-standard Ethernet patch cables to cascade up to 16 remote power

control switches together so that you can control up to 128 devices over a single

connection.

Features

• Ideal accessory to StarTech.com’s Server Remote Control product line, or as a

standalone power management solution

• Manage the power requirements of up to 8 computers or other devices from a single

switch

•Versatile cascade feature allows you to combine up to 16 power management

switches to control up to 128 devices

• Access the features of the management switch from its easy-to-use software

interface or from the front panel

• Easy setup using industry standard cabling and rack-mountable form factor

Before You Begin

System Requirements

•AStarTech.com Server Remote Control console (i.e. SV1110IPEXT) with an available

DTE serial connection, OR a host computer running Windows 95 or later with an

available RS-232 serial port (“standalone” operation)

• For standalone operation only: The host computer must have an optical drive (CD-

ROM, DVD-ROM) for software installation

Contents

This package should contain:

•1 x Remote Power Control Switch

•1 x Power Cord

•1 x RS-232 straight-through serial cable

•1 x Software Installation CD

•1 x Instruction Manual

Instruction Manual