Instruction manual

Instruction Manual

TOS/DSCP Priority

You can assign a queue with a DSCP priority. Click on the “Submit” button and the

information will be saved and updated to the table below.

Note: In order to allow QoS running TOS/DSCP priority, make sure you change the

“Priority Classication” option to “TOS/DSCP Priority” rst.

TCP/UDP Priority

First, choose the “Logical Port Type” and press the “Submit” button to start this function.

Then, if you want to run this priority based on pre-dened logical port, assign the

“Pre-dened Logical Port Number” entry and click on the “Submit” button to save the

changes.

If you want to activate this priority by user-dened logical port, you need to assign the

“User-dened Logical Port Range” section and press the “Submit” button to save your

modications.

Note: In order to allow QoS running TCP/UDP priority, make sure you change the

“Priority Classication” option to “TCP/UDP Priority” rst.