Instruction manual

Instruction Manual
14
CRC Counter
Displays the number of CRC errors while the 410VDSLEXT2 is active. Click the “Clear”
button to reset the counter and the “Refresh” button to update the latest counter
information.
VLAN
The 410VDSLEXT2 provides two options for VLAN setup. By “Port Base” or by “Tag
Base.” If you choose to set up VLAN based on Port, the settings in Tag Base will not be
activated.
Port Base VLAN
Ensure your “VLAN Mode” is correct. If incorrect, click the “Change Mode” button to
switch VLAN mode.
Choose “Port NO” rst, and then select which port should be in the VLAN member. Click
on the “Update” button to save your changes, and click on the “LoadDefault” button to
restore the default value. All current/updated information will be shown in the table.