Instruction manual

Instruction Manual
12
Port Mirroring
Choose to mirror congurations using two settings, click on “Change Mirror Mode”
button to change your mirror setup style.
In order to use the port mirroring function, you will need the following information:
1. Mirror Port: Select a mirror port to monitor the trac source.
2. Mirror Mode: Modes 1 and 2
• Disable: Port mirroring function is disabled.
• Rx: Copy the incoming packets of the selected source port to the
selected mirror port.
• Tx: Copy the outgoing packets of the selected source port to the selected
mirror port.
• Tx&Rx: Copy both incoming and outgoing packets from the selected
source port to the selected mirror port.
• Mirror source-destination pair: Tx port and Rx port must be dierent
ports.
3. Source Port: The source port trac which will be copied to the mirror port.
4. Destination Port: Only available in Mode 2.
Mode 1
Has four “Mirror Mode” options: Disable, Rx, Tx, and Tx&Rx. In this mode, select your
“Mirror Port Number,” “Source Port Number,” and “Mirror Mode.” Click the “Update”
button to save your settings.
Mode 2
Has two “Mirror Mode” options: Disable or Mirror source-destination pair. In addition,
you need to choose your “Destination Port” and “Source Port.” Click the “Update”
button to save your settings.