Instruction manual

Instruction Manual
3
Jumper Settings - Cont’d
PUSBADAP/PUSBADAPLP
JP2 (+12V Selector) Settings
Default: The 12V power source of the Powered
USB connectors are supplied by the PCI slot into
which the card is installed
The 12V power source of the Powered USB con-
nectors are supplied by the AUX power connector
(J5). This will require that a power cable be con-
nected from the computer power supply to J5. This
option provides more power for the Powered USB
devices over the USB2.0 cable.
J3: External
Input Power
DIN Connector*
J4:
24V-keyed
Connector
J2:
12V-Keyed
Connector
*J3:
Power DIN
Connector Pin
Assignment
JP1: +24V Power
Source Selector
(from Regulator
or External Power
DIN connector)
J5:
AUX Power Connector
J1:
USB Input Connector
(from Host USB port)
+5 +5
D-D-
D+D+
GG