Instruction manual

Instruction Manual
4
5. Connect an LP4 Molex power connector from the computer power supply, to the
power connector on the card.
6. Place the cover back onto the computer case.
7. Connect the DB9 breakout cable to the external 44-pin connector on the card.
8. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
Driver Installation
Windows 2000/XP/Server 2003
1. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. AutoPlay should automatically launch and display all of the folders on the CD. If not,
open “My Computer” and double-click on the CD/DVD drive.
3. Enter the folder “PCIe”, then “OXPCIe952” and double-click the le “Setup.exe”.
4. This should launch the driver Installation wizard. Continue through the wizard
and once complete, all the necessary drivers will be installed.
Windows Vista/7/Server 2008 R2
1. Upon starting Windows, if the “Found New Hardware” wizard appears on the screen,
cancel/close the window or choose not to install the drivers and insert the included
Driver CD into the computer’s CD/DVD drive.
2. AutoPlay should automatically launch and display all of the folders on the CD. If not,
open “Computer” and double-click on the CD/DVD.
3. Enter the folder “PCIe”, then “OXPCIe952” and double-click the le “Setup.exe”.
4. This should launch the driver Installation wizard. Continue through the wizard and
once complete, all the necessary drivers will be installed.