Instruction manual
Instruction Manual
2
Installation
WARNING! PCI Express cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly grounded before
opening your computer case or touching your PCI Express card. StarTech.com
recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any
static electricity build-up by touching a large grounded metal surface (such
as the computer case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
Jumper Conguration
J5
J6
J7
J8
J1
J2
J3
J4
JP9 Jumper
LP4 Molex
connector
Each serial port can be congured to output 5V or 12V power on pins 1, 4, 8, 9
depending on the jumper conguration or use the standard RS232 pin signals.
Serial Port 1
Pin Normal 5V 12V
1
J1
J1 J9 J1 J9
4
J3
J3 J9 J3 J9