2.5” eSATA USB External Hard Drive Enclosure for SATA HDD SAT2510U2E / SAT2510BU2E *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction This eSATA/USB External Hard Drive Enclosure transforms virtually any 2.5” SATA (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) into a cost-effective portable storage solution. Ideal for storing digital multimedia and other demanding applications, the 2.5” SATA hard drive enclosure connects to a host computer using USB 2.0 or eSATA with support for data transfer rates of up to 3Gbps (using eSATA) or 480Mbps (through USB 2.0).
Installation Power connector eSATA USB Power/Activity LED WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. WARNING: Hard drives, like all computer equipment can also be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching any components. StarTech.
Hardware Installation 1. Remove the screws from the enclosure, and remove the rear panel cover. Pull the front panel out of the enclosure: 2. Attach the 2.5” SATA hard drive to the connector provided: 3. Insert the front panel (with drive attached) into the rear panel (enclosure).
4. Fasten the front panel (with drive attached) to the rear panel (enclosure), using the screws removed in step #1. 5. To connect the hard drive enclosure to a host computer using USB, simply insert the included USB cable into the USB type Mini B slot provided by the enclosure, and the remaining end into an available USB type A slot on the host computer. 6. To connect the hard drive enclosure to a host computer using eSATA, simply plug the included eSATA cable from the enclosure to the host computer.
Verifying Installation Windows 2000/XP/Server 2003/Vista From the main desktop, right-click on “My Computer” (“Computer” in Vista), then select Manage. In the new Computer Management window, select Device Manager from the left window panel. Double-click on the “Disk Drives” option. A new disk drive should be listed under this category. It will typically contain the make/model of the hard drive you have installed in the enclosure. How to Use Windows 2000/XP/Server 2003/Vista 1.
3. Right-click on the Unallocated block, and select New Partition. 4. This will launch the New Partition Wizard. Please follow the instruction provided by the Wizard, to partition the drive for use. 5.
Specifications USB 2.0 Bus Interface SATA 3Gb/s 1 x USB mini B External Connectors 1 x eSATA port 1 x DC power connector Chipset JMircon JM20316 LEDs 1 x Power/Activity USB: 480 Mb/s Maximum Data Transfer Rate eSATA: 3 Gb/s 2.5” SATA 1.5 and 3 Gb/s hard drives, 9.5mm height Hard Drive Compatibility Dimensions 133.0 mm x 72.0 mm x 13.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
