Instruction manual
Instruction Manual
48
Cannot Login Via SSH
Remember to use either admin or a username created in the system as the user name
you give your SSH client.
If you see a warning about identity of host cannot be veried, and a question about
saving the host’s ngerprint, this is normal for the rst time you connect to any
machine running SSH. You should answer yes so that your SSH client saves the public
key of this host and doesn’t re-issue this warning.
Certicate warning shown when connecting via HTTPS.
It is normal for a warning dialog to be shown when connecting via HTTPS. The SSL
certicate the IP KVM switch uses is created when the unit is rst produced. It does not
contain the correct hostname (subject name) because you can change the hostname
as required. Also, it is not signed by a recognized certicate authority (CA) but is signed
by our own signing authority.
Mouse performance is erratic when using the GNOME
or KDE desktop in a Linux X-Window environment.
The mouse controls in GNOME and KDE environments oer both an acceleration and
sensitivity setting. The following directions correct this issue, and apply to Red Hat
Fedora Core 2, but should be similar for other distributions that use GNOME or KDE:
1. Click the Launch menu icon.
2. Choose Preferences > Mouse.
3. Click the Motion tab.
4. Set the Acceleration bar to the setting immediately left of center.
5. Set the Sensitivity bar to the left most settings (lowest possible).