Instruction manual

Instruction Manual

Using the Terminal Interface via Serial Port

The terminal interface you can access via the serial port permits the conguration of

the basic settings of the IP KVM switch. While not intended to be a substitute for the

Web interface, it does allow you to congure some of the same functions. The menu

list below describes the options that can be modied through the terminal interface.

Note that you must use the ‘W’ option to conrm and apply any changes made before

you exit the terminal session.

If you changed the status of the Ethernet Bridging feature, you will also need to power

the IP KVM switch on and o again to enable your changes.