Instruction manual
Instruction Manual
15
Machine Name
This is a name that is used to uniquely identify this machine. You might want to create
a DNS entry that matches this name. The name is provided as the Client Name for the
DHCP server. It is also shown at the top of each page in the web browser interface and
is the “desktop name” for VNC clients.
Other identication details
These values are for information purposes. They are visible from the VNC client and via
SNMP (if enabled).
Location
This string is sent as the system.sysLocation value over SNMP. It should describe the
location of this system.
Contact Name
This string is sent as the system.sysContact value over SNMP. It should describe who to
contact regarding this machine. Typically it includes an email address.
Network Address
This value is not used in our conguration, but is meant to store a user-dened value
that identies the controlled machine on the network. The ocial DNS name of the
controlled machine is a obvious value to put here, but you may use it for any purpose.
Description
A user-dened description for the controlled machine.
This menu allows you to congure a number of settings, including changing the
default password for admin (recommended). Read and consider the comments and
instructions on this menu before making any changes, as changing these features
could make the unit inaccessible through Web conguration (i.e. due to rewall
ltering). Note that any password changes you make will have to be entered in
duplicate to prevent the chance for error.
The Compatibility menu oers features that may oer enhanced functionality with
certain KVM and power products, such as StarTech.com’s Remote Power Switch
(PCM8155HNA). These can be left at their default values if you are not connecting the
unit to a KVM or power management device.
System Ident
Security
Compatibility