Instruction manual

Instruction Manual

5. You can manually congure settings for your network type by clicking the

link on the left-hand side of the screen (e.g. AppleTalk). Alternatively, you can

click the Setup Wizard link for a guided product setup. The System Tools link

allows you to access maintenance options for the print server, such as rmware

upgrades. Note that TCP/IP functionality must remain enabled if you wish to use

the Web conguration interface for future conguration, even if your network is

implemented using a protocol other than TCP/IP.

6. After you make changes to the print server conguration, it is recommended that

you reset it by unplugging it from the wall for 5 seconds and plugging it in again.

This will force the new settings to take eect immediately.

For information on how to congure your server and/or clients to use the print server

(for example, as a Novell print server or as an IPP device), consult your documentation

or a network specialist for assistance.