0/100 Mbps USB Print Server PM1115U *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction ............................................................................................1 Features......................................................................................................................................................... 1 Package Contents...................................................................................................................................... 1 Installation.........................................................
Introduction Thank you for purchasing a StarTech.com print server. This product allows you to connect a USB (PM1115U) or parallel (PM1115P) printer directly to your Ethernet network without the need for a host computer.
Installation Connecting the Print Server to the Network If you are installing the print server on a network that uses TCP/IP as the network protocol, you may wish to configure it on a standalone computer first if you are not using one of the Windows configuration utilities described in the next section. The print server uses a default IP address of 192.168.2.2, which may be an existing IP or not be on same subnet as other devices, depending on how the network is configured.
Configuring the Print Server Windows 2000/2003 Server When installed, the print server appears as a local printer port on a Windows computer. Using the Administrator installation utility, you can install the print server and share the printer to all the workstations on the network. 1. Insert the installation CD that came with the print server into your server’s CD-ROM drive. If the CD does not auto-run, double click the icon for your CD-ROM drive in My Computer.
Windows 98/ME/2000/XP Clients When the installation is complete, the print server appears as a local printer port on a Windows computer. Unlike the Administrator installation, this installation option does not install the configuration tools and does not allow you to assign an alias name to the print server. 1. Insert the installation CD that came with the print server into your server’s CD-ROM drive. If the CD does not auto-run, double click the icon for your CD-ROM drive in M Computer.
Configuring the Print Server for Non-Windows Networks The print server can be configured using any workstation or network that supports the TCP/IP protocol. The default IP address on the print server is 192.168.2.2. If this IP address is not compatible with your network, you can manually configure a single workstation to a compatible IP address (such as 192.168.2.100) and connect the print server directly to the workstation using crossover (also referred to as cross-wired) Ethernet patch cable.
5. You can manually configure settings for your network type by clicking the link on the left-hand side of the screen (e.g. AppleTalk). Alternatively, you can click the Setup Wizard link for a guided product setup. The System Tools link allows you to access maintenance options for the print server, such as firmware upgrades.
Specifications Network Protocols Supported ROHS, FCC, CE Network Interface RJ-45 Ethernet (auto-detects straight through/crossover) 10 or 100 Mbits/sec. (auto negotiated) Printer Interface 1 x USB 2.0/1.1 Type A (PM1115U) 1 x Integrated Centronics 36-pin (male) (PM1115P)) Printing Modes Supported LPR, RAW, IPP, SMB/TCP, UNIX Logical Printer Power Adapter Specifications Dimensions/Weight DC9V, 200mA, center positive PM1115U 2.9” x 2.25” x 0.75” (74 x 56 x 20 mm) LxWxH PM1115P 3.4” x 2.5” x 0.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a one year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
