Instruction manual

Instruction Manual
12
NOTE: The Apply button in each sub-menu page applies changes for
that page, but does not save them beyond the current session. For any
changes made, the user must select “Save” from the main menu.
Save
The Save sub-menu allows the user to confirm any changes that have
been made in the monitoring system. If changes are not confirmed with
this function, they will not be stored in the MMC110MMS.
Update Firmware
The Update Firmware sub-menu allows the user to download new firm-
ware for the MMC110MMS. There are two fields in this sub-menu:
TFTP Server IP Address• : Allows the user to enter the IP address of
the server that the new firmware will be downloaded from.
File Name• : Allows the user to enter the file name of the firmware to be
installed.
Once the information in the fields is correct, pressing the Upgrade button
begins the installation. Pressing the Reset button will clear the fields.
Reboot
The Reboot sub-menu allows the user to reboot the MMC110MMS.
Rebooting through this menu will require a new log-in to the monitoring
system after the MMC110MMS is successfully rebooted.
Telnet Management
To begin managing the MMC110MMS through Telnet, log in to the Media
Converter by entering your password; the username field is not required
by the device. The following commands are available from the Main
Screen:
Get Command - • Usage: get(g) <OPTION>