Instruction manual

Instruction Manual
11
The default get community string for the media converter is public.
Set Community• : Allows the user to set the setcommunity string. If the
SNMP Network management station only knows the set community
string, it can read and write to the MIBs. The default set community
string for the media converter is public.
NOTE: The Apply button in each sub-menu page applies changes for
that page, but does not save them beyond the current session. For any
changes made, the user must select “Save” from the main menu.
Alarm
The Alarm sub-menu allows a user to enable or disable alarms for the
following scenarios:
MC Fault• : Alarm will be triggered if the internal communication of the
Media Converter fails.
MC Link Status Changed• : Alarm will be triggered if the status of the
link between two Media Converters changes.
System Reboot• : Alarm will sound if the MMC110MMS reboots.
The Alarm sub-menu allows the user to configure email alerts when an
alarm is triggered. Options available here include:
Alarm by SMTP• : Allows the user to enable or disable email alerts.
SMTP Server Address• : Allows the user to set the IP address of the
server that will send the email alert.
Mail From• : Allows the user to set the “From” email address.
Mail To• : Allows the user to set the email address that the email alerts
will be sent to.
User Name• : Allows the user to enter the username of the SMTP server
account.
Password: Allows the user to enter the password of the SMTP server
account.
The Alarm sub-menu also allows the user to set SNMP traps for: MC
Link-Status Changed System Reboot.
The user can choose Trap Host V1 or V2 and input IP addresses for four
trap hosts.