Instruction manual

Instruction Manual

to a VLAN group. Users can choose TX Port, FX Port,

or Mgmt Port. If Mgmt Port is selected, one of TX Port

or FX Port must also be selected.

Untag• : Allows the user to enable tagged or untagged VLAN for that

VLAN group. The MMC110MMS supports a maximum of one

untagged VLAN.

NOTE: The Apply button in each sub-menu page applies changes for

that page, but does not save them beyond the current session. For any

changes made, the user must select “Save” from the main menu.

SNMP Conﬁguration

The Simple Network Management Protocol (SNMP) Conﬁguration sub-

menu provides four ﬁelds for users to edit:

System Contact• : Allows the user to enter the name of the person in

charge of the network system.

System Location• : Allows the user to set the location of the network

system.

Get Community• : Allows the user to set the getcommunity string. If the

system only knows the get community string, it can only read MIBs.