Instruction manual

Instruction Manual
9
NOTE: The Apply button in each sub-menu page applies changes for
that page, but does not save them beyond the current session. For any
changes made, the user must select “Save” from the main menu.
MAC Address Filter
The MAC Address Filter sub-menu contains fields for each of the two
ports on the MMC110MMS that allows the user to enable MAC address
filtering for specific addresses. If one or more MAC addresses are en-
abled, the filter process is turned on and only those MAC addresses that
are enabled will be able to pass through the MMC110MMS. All packets
with MAC addresses that are not listed will be blocked.
NOTE: The Apply button in each sub-menu page applies changes for
that page, but does not save them beyond the current session. For any
changes made, the user must select “Save” from the main menu.
VLAN Configuration
The VLAN Configuration sub-menu has four main columns of fields:
Active• : Allows the user to enable VLAN configuration
VLAN ID• : Allows the user to enter a VLAN ID number.
VLAN Member• : Allows the user to configure which ports will be added