Specification Sheet

1202F Fractional Dial Caliper
Cat. No. EDP Description
1202F-6 68931 0-6" Fractional Dial Caliper in Case
1202F-8 69757 0-8" Fractional Dial Caliper in Case
1202F-12 69758 0-12" Fractional Dial Caliper in Case
Direct Reading in Fractions
For many applications, the dimension being checked is specified as a fraction. Since
dial and electronic calipers display measurements as decimals, the person doing
the measurement must convert the decimal readout from the dial into a fraction –
inconvenient at best, and sometimes leading to errors. The Starrett 1202F solves this
problem.
The 1202F shows measurements as fractions on the yellow outer scale with 1/64th
inch graduations, and decimal measurements on the white inner scale with 1/100th
inch graduations.
Features and Specifications
• Sharp, clear dial graduations of 1/64" on the yellow outer scale, and .01" on the
white inner scale
• 1" per revolution
• Thumb-operated fine adjustment roll
• Sharp, black graduations on the satin finished bar, every .1"
• Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod
• Positive, spring-loaded double pinion anti-backlash control
• Lock screws for sliding jaw and dial bezel
• Knife-edge contacts
• Adjustable bezel
• 0-6", 0-8" and 0-12" sizes available
1202F Fractional Dial Caliper
Bulletin No. 373 PDF 12/11 Specifications subject to change. 978-249-3551 starrett.com