Specification
to fix pipes for electrical and mechanical installations to wall, floor or ceiling 10 - 65mm
BIS starQuick
®
Clamp (Grey)
(C 05 05)
C BIS Plastic Pipe Clamps
Features and benefits
■ one-part clamp
■ clamp closes by applying pressure to the
pipe
■ for outdoor use and installations in
swimming pool environments, chemical
factories, zinc factories, etc.
■ due to a patented profile it is possible to
tack several clamps to each other (up to 1
¼" CP)
■ material: modified PA6 (polyamide), grey
■ resistant to UV, aging, oil and gasoline
■ corrosion-free, recyclable, halogen free
■ temperature resistance: -40 ºF to +190 ºF
constant, +260 ºF peak (Note:
temperature must be above 15 °F during
installation process)
■ Plenum rated - tested to ASTM E-84
Part No. D IP CT Type B H h Fa,z Fb,z KIW
A
UL UPC Pack
1
Pack
2
(mm) (") (") (") (") (") (lbs) (lbs)
085 4 010 10 - 12 - ¼ SQ-10 1.1 1.3 0.91 38 112 - UL UPC 100 1.200
085 4 012 12 - 14 ¼ ⅜ SQ-12 1.1 1.3 0.91 40 123 KIWA UL UPC 100 1.200
085 4 015 14 - 16 - ½ SQ-15 1.1 1.4 0.94 45 134 KIWA UL UPC 100 1.200
085 4 018 16 - 20 ⅜ ⅝ SQ-17 1.1 1.6 1.00 51 157 KIWA UL UPC 100 800
085 4 022 20 - 23 ½ ¾ SQ-20 1.1 1.7 1.10 60 179 KIWA UL UPC 50 600
085 4 028 24 - 28 ¾ - SQ-25 1.6 2.0 1.20 63 191 KIWA UL UPC 50 600
085 4 031 28 - 32 - 1 SQ-28 1.6 2.1 1.30 67 202 KIWA UL UPC 50 400
085 4 035 32 - 35 1 1¼ SQ-32 1.7 2.2 1.30 74 224 KIWA UL UPC 50 400
085 4 038 35 - 40 - - SQ-36 1.9 2.6 1.60 83 247 KIWA UL UPC 25 300
085 4 042 40 - 44 1¼ 1½ SQ-40 2.0 2.8 1.70 90 269 KIWA UL UPC 25 200
085 4 050 44 - 50 - - SQ-47 2.2 3.0 1.80 96 292 - UL UPC 25 200
085 4 054 48 - 55 1½ 2 SQ-51 2.5 3.2 1.90 105 314 - UL UPC 15 180
085 4 063 59 - 65 2 - SQ-59 2.9 3.7 2.20 112 337 - UL UPC 15 180
Fa,x = Fa,z / Fb,x = Fb,z.
Maximum allowed load at a temperature of +21 °C (+70 °F) and fixing with M6 BIS starQuick
®
nut +
M6 steel treaded rod.
The values are recommended values and based on our nowadays technical knowledge, experience
and statements in the literature as well as testing under laboratory circumstances. They do not
relieve the user of own testing of the end product due to the big number of parameter of influence
in the mounting process and the application. A legal confirmed assurance of properties or the
suitability for a specific application cannot be based on our specifications.
EN-USA 06/2018- Subject to modifications
Complementary
BIS starQuick
®
Duo Bracket
BIS starQuick
®
Fixing Nut
BIS GOLD