Installation Manual

StarLink TrackerSF Installation Manual
ERM Advanced Telematics page: 9
Reconnect the vehicle battery and test the ignition (green) wire – you
should measure 0V when the ignition switch is set to OFF and 12V (or
24V) when it is set to ON
5. Gather together all the unused wires and tie them neatly so they do not
interfere with any other parts or systems.
Keep in mind that you may need to use some of the wires in the future
6. Insert the SIM card, as follows:
• Using a small, flat screwdriver, remove the cover of the SIM slot on the
device side.
• Slide the SIM card into the SIM slot and gently push it in (note the SIM
polarity).
• Use a screwdriver to push and lock the SIM card in place.
• Replace the cover of the SIM slot.