Installation Manual

StarLink TrackerSF Installation Manual
ERM Advanced Telematics page: 4
3. General Instructions
• Install the device with the THIS SIDE UP label facing upwards.
• Make sure no metal objects obstruct the device.
• Use cable ties to hold wires in place and create tidy wire bundles.
• Double-sided adhesive stickers could be used for securing the device in its
selected location.
• Instructions for soldering wires:
a. Strip the ends of the wires to be soldered together.
b. Slide an appropriate length of heat-shrink insulation tubing on to one of the
wires.
c. Solder the wires.
d. Slide the heat-shrink insulation over the solder joint.