Installation Manual

StarLink TrackerSF Installation Manual
ERM Advanced Telematics page: 13
6. StarLink Configuration
6.1 USB Adapter
Configuring StarLink devices is performed with your computer. To connect the
device to the computer, use the USB adapter as described in the following
procedure.
1. Verify that the USB adapter kit contains all the items as described in the
following diagram:
2. Using the eNet cable, connect the eNet hub to the USB Adapter, then
connect the other end to the eNet hub:
USB cable
eNet cable
StarLink
harness
Power and
Ignition cable
USB Adaptor
module
eNet spare
cable
eNet hub