Installation Manual

StarLink TrackerSF Installation Manual
ERM Advanced Telematics page: 11
fix the device Opposite to driving direction:
5.2 Positioning StarLink Devices in the vehicle
5.2.1 General Installation Instructions
• Install the StarLink device in a dry environment where there is no
possibility of water penetration.
• Affix the StarLink device firmly to the vehicle with cable ties or double-
sided adhesive.
• Place the StarLink device away from heat sources.
• Place the StarLink device away from vehicle computers.
1. The StarLink GPS antenna is located on the top surface of the
device (see the markings on the device). Do not cover this area
with metallic parts.
5.2.2 StarLink Location for Optimal Reception Quality
1. Identify the desired location in which to install the device. This location
should be concealed (inaccessible to unauthorized personnel), clean,
and free of water, heat, and large metallic objects. For the best reception
install the StarLink device on the top part of the front dashboard.
Make sure that the GPS side faces upwards.
Make sure that there is no metallic surface above the StarLink
device.
If necessary, dismantle vehicle components to gain access to the
selected concealed location.
2. Place the device in the selected location but do not affix it yet.
3. The StarLink device should be installed horizontally, with its LEDs facing
towards the sky.